Operation of Ambra Lights lights

Make sure your light is plugged in and follow the instructions.

🎚️ Bedienung über den Schalter

Drücke den Schalter einmal um deine Leuchte einzuschalten, zwei mal um sie auszuschalten und halte den Knopf gedrückt um sie zu dimmen.

Operation via smartphone or PC

1. Download WLED. The heart of all our lights is WLED. This is the open-source software that fills your home with the light of your choice. Scan the QR code and download the app.

2. Connect to your light. Connect to your light's Wi-Fi network. To do this, go to your phone/PC's Wi-Fi settings and connect to "WLED-AP". The password is "wled1234". A page will appear automatically. Now go to "Config".

3. Connect the light to your Wi-Fi network. Now go to "Wi-Fi Setup" and search for your home Wi-Fi network. Select it or enter the name manually. Then enter your Wi-Fi password. Save with "Save & Connect".

4. Ready to find your personal ambiance! Open "WLED". You'll see your light. Tap on the light's name. The controls will open. Here you can set your preferred color. Once you've found the perfect setting, go to step 5.

5. Save your settings. Go to "Presets" in the bottom right corner. Click on "+ Preset" and enter its name, e.g., "Warm Orange". If you want this ambience to always appear when you turn on the light, check the box next to "Apply at boot" and enter 1 in the "Save to ID" field.

📱 Operation via remote control

You can control your light directly with the remote control – without an app or smartphone.

ON

Turn on the light.

OFF

Turn off the light.

🔆

Increases the brightness of the current setting.

🔅

Reduces brightness.

Light scenes (1–4)

Buttons 1, 2, 3 and 4 are stored light scenes.

Each light scene saves:

Color
brightness
Effect settings (if applicable)

Simply press the desired number to instantly activate the corresponding light scene.

The light scenes can be adjusted and saved again at any time in the WLED app.

☀️ Sunrise function

Sunrise light helps your body wake up naturally – gently, without an abrupt alarm. Your light gradually brightens, just like a real sunrise.

1️⃣ Activate sunrise

Open in the WLED app:

Config → Time & Macros

Then scroll down to the Time-controlled presets section.

⏰Set time or use real sunrise

Enter your desired time on one line and the number 8 in the "Preset" column.

or activate the Sunrise option.

When "Sunrise" is activated, the light automatically switches on in accordance with the actual sunrise at your location.

📅 By clicking the calendar icon, you can specify the days of the week on which the sunrise should take place.

Save the setting with " Save "